{"title":"EarthQuaker","description":null,"products":[{"product_id":"earthquaker-devices-afterneath-v2-otherworldly-ambient-reverb","title":"EarthQuaker Devices Afterneath V2 Otherworldly Ambient Reverb","description":"\u003cb\u003e     \u003cstrong\u003eAfterneath V2™\u003c\/strong\u003e  \u003cstrong\u003eOtherwordly Ambient Reverb\u003c\/strong\u003e \u003c\/b\u003e\u003cp\u003eThe Afterneath sounds a lot like it looks – a wizard in a cave in a box. You are the wizard – or sorceress, if you prefer – and the cave is your instrument’s signal, vast, expansive, and magical. Do you go inside? Roll a D20 to proceed!\u003c\/p\u003e\u003cp\u003eOnce inside, a reflection of light from an unknown source catches your eye, and you notice a bizarre sheen on the walls of the cave. You timidly inch closer to the walls of the cave. Placing your hand gently on the cavern wall, you feel the rock move. The cave is alive! Alarmed, you emit a loud gasp, which reverberates throughout the subterranean landscape. Upon further listening, it appears as though the reverberations of your voice are in fact a swarm of short digital delays which may be used to create wild and cavernous reverbs, or scattered, short, rhythmic delays with bizarre characteristics.\u003c\/p\u003e\u003cp\u003eTake a moment to consider your Intelligence and Wisdom scores, as well as your spell inventory before proceeding further. You have six spells at your disposal.\u003c\/p\u003e\u003cp\u003eWill you cast “\u003cstrong\u003eLength\u003c\/strong\u003e,” which controls the decay and length of the reverb?\u003c\/p\u003e\u003cp\u003eWhat about “\u003cstrong\u003eDiffuse\u003c\/strong\u003e,” which adjusts the spread of the reverb? With your wand (or just the knob) turned counter-clockwise, the reverb is sharper with more attack, resulting in a stuttering sputter of individual early reflections. Clockwise casts a washy, more ambient-sounding spell.\u003c\/p\u003e\u003cp\u003eOverwhelmed by fear, you hastily cast “\u003cstrong\u003eDampen!\u003c\/strong\u003e” As you shout the incantation, you notice that the clockwise variation of this spell results in brighter tones, while as you rotate your wand counter-clockwise; you hear darker tones with a mellower top-end.  It’s almost as if your magic changes the hardness of the cavern walls, and thus the tonal characteristics of the reverb!\u003c\/p\u003e\u003cp\u003eElsewhere in your book of spells is “\u003cstrong\u003eDrag\u003c\/strong\u003e,” which separates the individual digital delay lines, literally dragging them through the very fabric of time and space towards an unknown event horizon from which they may never return. Clockwise “Drag” positions will gather the delay lines close together for a more reverb-like effect. Turn the “Drag” counter-clockwise, and the delay lines will begin to pull apart for a scattered ping-pong delay effect.\u003c\/p\u003e\u003cp\u003eThe “\u003cstrong\u003eReflect\u003c\/strong\u003e” spell alters the depth of the cave, and with it the regeneration of the reverb. This acts as a feedback control and will self-oscillate if cast by a high-level user. Turn clockwise for more wash and echoes, counter-clockwise for less.\u003c\/p\u003e\u003cp\u003eFinally, the “\u003cstrong\u003eMix\u003c\/strong\u003e” spell alters the alchemical balance between the input signal and the effect. The Afterneath does not go fully wet, but does lower the level of the input signal as you raise this control to create the appearance of a fully wet reverb.\u003c\/p\u003e\u003cp\u003eThe Afterneath is true-bypass, and built one-at-a-time by a wizard, two bards, a paladin, a monk, a handful of rangers, a couple druids, a barbarian, a rogue, and a Dungeon Master in the Gelatinous Cube of Akron, Ohio, USA.\u003c\/p\u003e\u003cp\u003eThe Afterneath uses silent relay-based soft touch switching. Audio will not pass without power.\u003c\/p\u003e       \u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e  \u003cstrong\u003eControls\u003c\/strong\u003e \u003cp\u003e\u003cstrong\u003eLength: \u003c\/strong\u003eControls the decay length of the reverb.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDiffuse:\u003c\/strong\u003e Adjusts the spread of the reverb. Sharper with more attack counter clockwise, more ambient and washy as you turn it clockwise.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDampen:\u003c\/strong\u003e Clockwise for brighter tones, counter clockwise for darker tones.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrag: \u003c\/strong\u003eThis digital reverb is made up of a bunch of short delays, this separates the delay lines creating a stuttering, pingy effect. This is the coolest control on the Afterneath, we highly advise slowly turning this while you let notes ring out for a cool warped speed effect. More delay as you turn it counter clockwise, more reverb as you turn it clockwise.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReflect: \u003c\/strong\u003eControls the regeneration of the reverb, turn clockwise for more wash and echos, counterclockwise for less. This will self oscillate if turned up high.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMix:\u003c\/strong\u003e Blends the wet signal into the dry. Though it does not actually go full wet, it will gradually lower the clean level as you turn it clockwise and give the appearance of full wet.\u003c\/p\u003e \u003cstrong\u003eMeasures\u003c\/strong\u003e \u003cp\u003e4.625″ x 2.5″ x 2.25″ with knobs\u003c\/p\u003e \u003cstrong\u003ePower \u003c\/strong\u003e \u003cp\u003eOur pedals take a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!\u003c\/p\u003e\u003cp\u003eCurrent draw is 65 mA.\u003c\/p\u003e    \u003cbr\u003e\u003cbr\u003e ","brand":"EarthQuaker","offers":[{"title":"Default Title","offer_id":48304196223168,"sku":"AFTERNEATHV2","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4002\/9888\/files\/sh1ien4yfudwikcux78h__13667.1682744644.1280.1280.jpg?v=1779236498"},{"product_id":"earthquaker-devices-aqueduct-vibrato","title":"EarthQuaker Devices Aqueduct Vibrato","description":"Extra special effects pedal manufacturer EarthQuaker Devices will release the Aqueduct Vibrato on August 29, 2018.\u003cbr\u003e \u003cbr\u003eAqueduct uses a short delay line with eight modulation modes to deliver gentle amp-like rolling pitch-wobbles, steady kosmiche pulsations, rapid trills, slimy sonic squiggles, whammy bar wiggles, pitch bends, and anything else your pitch-warped brain can picture in your murky mind’s eye.\u003cbr\u003e \u003cbr\u003eWith eight modulation methods to choose, Aqueduct offers a variety of pitch-shifting vibrato tones adaptable to nearly any musical situation. Sine, Triangle, Ramp, and Square modes provide tried-and-true pitch modulation for players wanting to add subtle and organic textures to their music. Random mode introduces a “warped record” effect at low settings and rolls the dice on an unpredictable assortment of greasy pitch-bends as the Depth is increased. For players on the hunt for a dynamic and touch-sensitive Vibrato experience, Aqueduct’s Envelope modes allow for interactive control over the Depth, Rate, and pitch of the vibrato by simply playing harder or softer.\u003cbr\u003e \u003cbr\u003eEnvelope-Controlled Pitch mode (Env P) is equipped with a wet\/dry blend expanding the tonal possibilities beyond vibrato to include chorus, flanger, and tactile tremolo bar-like pitch bends. We’ve lovingly nicknamed it “the My Bloody Valentine setting.” \u003cbr\u003e \u003cbr\u003eAqueduct’s intuitive control set make it easy for pedal novices and tap-dancing pedalheads alike to dial in swampy vintage-inspired vibrato, synthesizer-like sonar pulses, touch-sensitive pitch modulation, and more. \u003cstrong\u003eRate \u003c\/strong\u003eadjusts the LFO speed which controls how quickly the pitch rises and falls. \u003cstrong\u003eDepth\u003c\/strong\u003e controls the LFO amplitude, adjusting the intensity of the vibrato effect. The rotary switch labeled \u003cstrong\u003eMode\u003c\/strong\u003e selects between one of eight LFO waveshape and envelope combinations which drastically alter the character of the modulation.\u003cbr\u003e \u003cbr\u003eIt is also the latest pedal to feature EarthQuaker Devices proprietary Flexi-Switch™ feature which allows users to select between momentary and traditional latching-style switching in the moment and on the fly. For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass. For momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.\u003cbr\u003e \u003cbr\u003eAqueduct Vibrato will be available at EarthQuaker Devices dealers worldwide on August 29, 2018.                                                            \t\t\t\t\t\t\t\t                                                                                                                                                                                                                                                                  \t\t\t\t\t\t\t\t                                                                                        \u003cstrong\u003eAqueduct Vibrato\u003c\/strong\u003e\u003cul\u003e\t\u003cli\u003eTrue pitch-shifting vibrato\u003c\/li\u003e\t\u003cli\u003eEasily conjure swampy vintage-inspired vibrato, synth-like sonar pulses, touch-sensitive pitch modulation, chorus, flanger, and tactile tremolo bar-like pitch bends from a single pedal\u003c\/li\u003e\t\u003cli\u003eEight modulation modes\t\u003cul\u003e\t\t\u003cli\u003e\n\u003cstrong\u003eSine: \u003c\/strong\u003eThe smoothest and most subtle of all waveforms, sine waves are most commonly associated with classic amp-like vibrato.\u003c\/li\u003e\t\t\u003cli\u003e\n\u003cstrong\u003eTriangle: \u003c\/strong\u003eTriangle waves have a sharper rise and fall than sine waves with a more pronounced pitch bend at the peak of each LFO cycle.\u003c\/li\u003e\t\t\u003cli\u003e\n\u003cstrong\u003eRamp: \u003c\/strong\u003eLike a triangle wave with a twist. The Ramp waveform has a sharp sonar pulse followed by a rapid downward slope with a synthesizer-like sustain and release.\u003c\/li\u003e\t\t\u003cli\u003e\n\u003cstrong\u003eSquare:\u003c\/strong\u003e Square waves are the most rigid and abrupt of the waveforms. Rather than gliding smoothly between pitches, square waves produce an instant on-or-off transition between notes.\u003c\/li\u003e\t\t\u003cli\u003e\n\u003cstrong\u003eRandom:\u003c\/strong\u003e introduces a “warped record” effect at low settings and rolls the dice on an unpredictable assortment of greasy pitch-bends as the Depth is increased\u003c\/li\u003e\t\t\u003cli\u003e\n\u003cstrong\u003eEnv D:\u003c\/strong\u003e Envelope-Controlled Depth mode. The waveshape is set to a sine wave, the speed of which may be adjusted using the Rate control. The Depth control sets the sensitivity of the envelope - the point at which the effect kicks in as you play. In this mode, your pick attack sets the intensity of the modulation. The harder you dig in, the more pronounced the effect.\u003c\/li\u003e\t\t\u003cli\u003e\n\u003cstrong\u003eEnv R:\u003c\/strong\u003e This is Envelope-Controlled Rate mode. In this mode, the input level (i.e. pick attack) controls the LFO rate. Play harder for faster modulation or lay low for slower modulation speeds. The Rate control adjusts the sensitivity of the envelope. Depth selects the LFO intensity.\u003c\/li\u003e\t\t\u003cli\u003e\n\u003cstrong\u003eEnv P:\u003c\/strong\u003e This is Envelope-Controlled Pitch mode, which we’ve lovingly nicknamed “The My Bloody Valentine setting.” If your instrument doesn’t have a tremolo bar, it does now. In this mode, the frequency modulation is controlled by the dynamics of your pick attack and not the LFO.\u003c\/li\u003e\t\u003c\/ul\u003e\t\u003c\/li\u003e\t\u003cli\u003eFlexi-Switch™ allows for momentary and traditional latching-style switching\u003c\/li\u003e\t\u003cli\u003eTrue Bypass\u003c\/li\u003e\t\u003cli\u003eSilent relay-based switching\u003c\/li\u003e\t\u003cli\u003eAll-analog dry signal path\u003c\/li\u003e\t\u003cli\u003eAll-digital wet signal path\u003c\/li\u003e\t\u003cli\u003eLifetime guarantee\u003c\/li\u003e\t\u003cli\u003eCurrent Draw: 68mA\u003c\/li\u003e\t\u003cli\u003eInput Impedance: 1M Ohm\u003c\/li\u003e\t\u003cli\u003eOutput Impedance: \u0026lt;10K Ohm\u003c\/li\u003e\t\u003cli\u003eMAP: $199.00 USD\u003c\/li\u003e\t\u003cli\u003eDealer Cost: $139.30 USD\u003c\/li\u003e\t\u003cli\u003eGTIN-12: 855755007343\u003c\/li\u003e\t\u003cli\u003eSKU: EQDAQUE\u003c\/li\u003e\t\u003cli\u003eBoxed Dimensions: 5.5” x 3.25” x 3.25”\u003c\/li\u003e\t\u003cli\u003eOut-of-box Dimensions: 4.75\" x 2.50″ x 2.25″\u003c\/li\u003e\t\u003cli\u003eBoxed Weight (USA): 1.1 lbs.\u003c\/li\u003e\t\u003cli\u003eEach and every Aqueduct is constructed with human hands in Akron, Ohio, USA.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EarthQuaker","offers":[{"title":"Default Title","offer_id":48304196255936,"sku":"AQUEDUCT","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4002\/9888\/files\/swls7kmyvmaadxqiuw3p__13529.1682744645.1280.1280.jpg?v=1779236500"},{"product_id":"earthquaker-devices-arrows-v2-preamp-booster","title":"EarthQuaker Devices Arrows V2 Preamp Booster","description":"The Arrows is an all-discrete tone sculpting preamp booster. It was designed with the intention of adding an additional channel of gain to all your dirt pedals as well as brightening up neck pickups. It boosts midrange, tightens up the low end and makes the top end shine while adding some push to drive your dirt into blooming sustain with excellent harmonics. Its simple interface is no nonsense; a single control that will either boost or cut your signal. Use the Arrows to remove the muck from bass heavy fuzz pedals, push light overdrives into higher gains than you thought possible or even on its own to make your signal really pop with more pizazz. All analog, true bypass and handmade one at a time in the weird pit of Akron, Ohio.      \u003cstrong\u003eDimensions:\u003c\/strong\u003e 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs    \u003cbr\u003e\u003cbr\u003e    \u003cstrong\u003eCurrent Draw:\u003c\/strong\u003e 8 mA    \u003cbr\u003e\u003cbr\u003e    \u003cstrong\u003eInput Impedance:\u003c\/strong\u003e 10 MΩ    \u003cbr\u003e\u003cbr\u003e    \u003cstrong\u003eOutput Impedance:\u003c\/strong\u003e \u0026lt;10 kΩ      \u003cbr\u003e\u003cbr\u003e    \u003cstrong\u003eSwitching\u003c\/strong\u003e \u003cp\u003eThis device is true bypass and uses electronic relay-based switching. Audio will not pass without power.\u003c\/p\u003e   \u003cbr\u003e\u003cbr\u003e    \u003cstrong\u003ePower \u003c\/strong\u003e \u003cp\u003eThis device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. \u003cstrong\u003eDO NOT RUN AT HIGHER VOLTAGES! \u003c\/strong\u003e\u003c\/p\u003e   \u003cbr\u003e","brand":"EarthQuaker","offers":[{"title":"Default Title","offer_id":48304196288704,"sku":"ARROWSV2","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4002\/9888\/files\/stevryeusgyui4mluup5__10794.1682744645.1280.1280.jpg?v=1779236500"},{"product_id":"earthquaker-devices-astral-destiny-octal-octave-reverberation-odyssey","title":"EarthQuaker Devices Astral Destiny Octal Octave Reverberation Odyssey","description":"The Astral Destiny is a compact and powerful modulated octave reverb pedal that features 8 reverb modes with 8 editable presets, assignable expression control, tails for natural reverb decay when the effect is bypassed and a super cool stretch feature that doubles the length of the reverb while adding an adjustable pitch bending effect. Each Astral Destiny is built one at a time by a team of Los Angeles-based robots and a handful of real life humans in the occupied Erie territory presently known as Akron, Ohio.\u003cul\u003e\u003cli\u003e8 celestial reverb modes:\u003c\/li\u003e\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003eAbyss: Huge reverb with no octave effect\u003c\/li\u003e\n\u003cli\u003eShimmer: Adds an upper octave to the reverb tail\u003c\/li\u003e\n\u003cli\u003eSub: Adds a lower octave to the reverb tail\u003c\/li\u003e\n\u003cli\u003eSub Shimmer: Adds an upper and lower octave to the reverb tail\u003c\/li\u003e\n\u003cli\u003eAstral: Adds an upper and lower octave combined with a regenerating tail\u003c\/li\u003e\n\u003cli\u003eAscend: Upward pitch bending; best used on sustained notes and chords\u003c\/li\u003e\n\u003cli\u003eDescend: Downward pitch bending; best used on sustained notes and chords\u003c\/li\u003e\n\u003cli\u003eCosmos: Adds a regenerating fifth to the reverb tail; best used on sustained notes and chords\u003c\/li\u003e\n\u003c\/ol\u003e\u003cul\u003e\n\u003cli\u003e8 completely customizable presets\u003c\/li\u003e\n\u003cli\u003eAssignable expression or CV over Length, Depth, Rate, Tone, or Mix panel controls\u003c\/li\u003e\n\u003cli\u003eAdjustable modulation from zero to cosmic lasers\u003c\/li\u003e\n\u003cli\u003eBuffered bypass switching with tails or no tails operation. Factory ships with tails for natural reverb decay when effect is bypassed\u003c\/li\u003e\n\u003cli\u003eUnearthly stretch feature which doubles the reverb length while adding an adjustable pitch bending effect\u003c\/li\u003e\n\u003cli\u003eAll analog dry signal path and a totally digital effect signal path\u003c\/li\u003e\n\u003cli\u003eArtwork from world-renowned Marvel comic book artist, Matt Horak\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003cli\u003eCurrent Draw: 85 mA\u003c\/li\u003e\n\u003cli\u003eInput Impedance: 500 kΩ\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 100 Ω\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"EarthQuaker","offers":[{"title":"Default Title","offer_id":48304196321472,"sku":"ASTRALDESTINY","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4002\/9888\/files\/soxyilcm9qydslcoaaox__14492.1682744646.1280.1280.jpg?v=1779236500"},{"product_id":"earthquaker-devices-aurelius","title":"EarthQuaker Devices Aurelius","description":"\u003cp\u003eThis is not your run of the mill chorus pedal. This compact, beautifully cased wonder is a three-voice chorus with six programmable presets and expression control. Choose from Vibrato Mode, Chorus Mode, and Rotary Mode and manipulate their \u003ci\u003e\u003cem\u003eWidth\u003c\/em\u003e\u003c\/i\u003e, \u003ci\u003e\u003cem\u003eRate\u003c\/em\u003e\u003c\/i\u003e, and \u003ci\u003e\u003cem\u003eBalance\u003c\/em\u003e\u003c\/i\u003e to achieve your ideal sound. Shift seamlessly from one mode to another to cop a blend that is all your own. One simple tap of the Preset (“Save\/Recall”) switch and you can summon up to six settings of your choosing at will.\u003c\/p\u003e\u003cp\u003eInspired by the 1970s CE-1 Chorus Ensemble pedal, this digital unit has been tirelessly tweaked and fine-tuned to give you an all-encompassing chorus and vibrato experience like nothing else. And by popular demand, we’ve equipped this with an expression control so you can use any TRS expression pedal to manipulate the \u003ci\u003e\u003cem\u003eWidth\u003c\/em\u003e\u003c\/i\u003e, \u003ci\u003e\u003cem\u003eRate\u003c\/em\u003e\u003c\/i\u003e or \u003ci\u003e\u003cem\u003eBalance\u003c\/em\u003e\u003c\/i\u003e. Put it in Vibrato Mode and you’ll have a really subtle chorus with a seasick vibrato and alternate quickly between the two seamlessly. And that’s only one mode. The possibilities are endless.\u003c\/p\u003e","brand":"EarthQuaker","offers":[{"title":"Default Title","offer_id":48304196354240,"sku":"AURELIUS","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4002\/9888\/files\/lc9enaizvdjsjj9sbhvz__22887.1682744646.1280.1280.jpg?v=1779236501"},{"product_id":"earthquaker-devices-bit-commander-v2-guitar-synthesizer","title":"EarthQuaker Devices Bit Commander V2 Guitar Synthesizer","description":"\u003cb\u003e    \u003cstrong\u003eBit Commander V2™\u003c\/strong\u003e  \u003cstrong\u003eGuitar Synthesizer\u003c\/strong\u003e \u003c\/b\u003e\u003cp\u003eThe Bit Commander is a monophonic analog guitar synthesizer with four octaves of vintage square wave synth tones. Its no-nonsense interface makes it easy to add or subtract octaves to create a wide variety of sounds without having to dial in envelopes or oscillators. Ripping sub-octave thump, pulsing octave down, a lightly squared base tone and a swelling transformer based octave up all join together to make a single guitar sound like an army of olde tyme synths.\u003c\/p\u003e\u003cp\u003eLike all analog octave effects, there are some basic rules to follow that will get you the most enjoyment from your Bit Commander. Use the neck pickup and play single notes. The best tracking occurs from the 7th fret up on all the strings. Below the 7th will still track but there will be occasional glitches and stutters. The lower the note, the harder it is for the Bit Commander to register. The use of Bass and lower registers on keyboards will yield unexpected, sometimes pleasing, sometimes disgusting results. These are not mistakes or flaws, it is the nature of analog octaves.\u003c\/p\u003e\u003cp\u003eAnalog, true bypass and hand made one at a time in the republic of Akron Ohio.\u003c\/p\u003e       \u003cstrong\u003eControls\u003c\/strong\u003e \u003cp\u003e\u003cstrong\u003eSub:\u003c\/strong\u003e Two octaves down level\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDown 1:\u003c\/strong\u003e One octave down level\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eUp 1:\u003c\/strong\u003e One octave up level\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBase:\u003c\/strong\u003e Squared input signal level\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLevel:\u003c\/strong\u003e Master volume\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFilter:\u003c\/strong\u003e Tone control, more highs clockwise, more warmth counter clockwise\u003c\/p\u003e   ","brand":"EarthQuaker","offers":[{"title":"Default Title","offer_id":48304196387008,"sku":"BITCOMMANDERV2","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4002\/9888\/files\/g6wlktaripiujdnwvtu5__49154.1682744648.1280.1280.jpg?v=1779236503"},{"product_id":"earthquaker-devices-erupter-ultimate-fuzz","title":"EarthQuaker Devices Erupter Ultimate Fuzz","description":"\u003cstrong\u003eErupter™\u003cbr\u003e\u003c\/strong\u003eUltimate Fuzz Tone \u003cp\u003eCan we ask you a serious question? When’s the last time you turned up your favorite fuzz pedal to anything but eleven? If there’s one true thing about rock n’ roll, it’s that it sounds best cranked all the way up. But where do we go from here? We go one louder. Enter the Erupter. \u003c\/p\u003e\u003cp\u003eThe Erupter is the result of over two years’ worth of tone-chasing, tweaking, and experimentation in search of the ultimate classic fuzz tone with a big low end, a biting top end without being too harsh, and just enough output to politely send a tube amp over the top to deliver a well-rounded and defined fuzz tone with just enough pummeling intensity, so you can rock n’ roll all night and still get to bed at a reasonable hour.\u003c\/p\u003e\u003cp\u003eIt’s the perfect fuzz... just sayin’.\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e  \u003cp\u003e\u003cstrong\u003eBias:\u003c\/strong\u003e This control has a center detent for the “perfect” fuzz setting. When in the center position, the tone will be big and round with a slight volume boost and great sustain. As you turn this counterclockwise it becomes more gated with lower output. As you turn this clockwise it becomes louder and more refined.\u003c\/p\u003e   \u003cbr\u003e\u003cbr\u003e    Design Notes       \u003cp\u003eThe Erupter™ fuzz started as something I wanted just for myself - the ultimate classic fuzz tone. One with a simple, yet effective control interface and that works anywhere in the signal chain. A fuzz with a big low end, but not too mushy, a biting top end without being too harsh, and just enough output to politely send a tube amp over the top. It must also have excellent wide-range clean up with the guitar’s volume control without losing too much low end. It took a long time and a lot of experimenting to get there but I think I finally nailed it.\u003c\/p\u003e\u003cp\u003eA lot of people think this classic circuit is a no-brainer due to its low parts count, but I beg to differ. Since there are so few parts in the circuit, everything makes a difference. That’s why you see so many variations on the market today. You can use the topology, but the sound always varies. I’ve made plenty of designs based on this circuit in the past, but none of them gave me the perfect, overloaded-yet-refined full-force fuzz tone with crushing lows, smooth top end and an input that is responsive through the full range of the guitars volume control without losing too much low end in the process. Until now!\u003c\/p\u003e\u003cp\u003eI spent almost two years swapping transistors, measuring resistors, adding controls, removing controls, trying all types and values of capacitors, and basically using every trick I ever learned. What I landed on is exactly the sound I had in my head - the perfect crushing fuzz tone.\u003c\/p\u003e\u003cp\u003eI managed to whittle down the controls to the most important one of all, Bias. Why leave out the volume and fuzz controls? Most people leave the volume and fuzz all the way up, at least that’s the way I always do it. This yields the thickest fuzz and the level is slightly above unity to push the full frequency range of the guitar out front when you kick it on. By setting these at maximum and allowing control over the bias, you can freely adjust the character of the fuzz for more tonal variations.\u003c\/p\u003e      \u003cp\u003eWe had a custom center-detent pot made to fit the required resistance for the Erupter. When the Bias control is set at noon you will feel a little click. That means the pedal is perfectly biased to give the best possible fuzz tone. As you turn the Bias counterclockwise (colder) the fuzz lowers in level and becomes more gated. As you turn the Bias clockwise (hotter), the fuzz becomes cleaner and more refined and the output level increases. \u003c\/p\u003e\u003cp\u003eThe Erupter also has a buffered front end to give the best possible input signal with stronger highs, tighter lows, and allows it to be used before or after any other effects (even a wah pedal) without the usual problems associated with this circuit. What!? How’s it do that? By using transformer based pickup simulation, of course. It’s a cool little trick I learned from an article written by Jack Orman almost 15 years ago. These two features allow greater use of the guitar’s volume control to clean up the fuzz. Try it, you’ll be amazed at the amount of tones you can get all the way across the dial!\u003c\/p\u003e\u003cp\u003eBut what about the parts? What kind of magic is in there? The Erupter uses new production 5% ½ watt carbon composition resistors, metallized polyester film capacitors, Sprague and BC electrolytic capacitors and NOS, hand-matched, low gain silicon transistors for temperature stability and predictable operation under all extremes. I tried a lot of parts in this circuit during the development. Everything from our usual production 1% metal film resistors and caps to expensive NOS paper in oil capacitors. I tried every rare germanium transistor I had and countless different silicon transistors. What I landed on gave me the well-rounded and defined fuzz tone with just enough pummeling intensity that I’ve been wishing for.\u003c\/p\u003e    \u003cbr\u003e","brand":"EarthQuaker","offers":[{"title":"Default Title","offer_id":48304196419776,"sku":"ERUPTER","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4002\/9888\/files\/cq4glfurmknncqsflfja__85102.1682744649.1280.1280.jpg?v=1779236503"},{"product_id":"earthquaker-devices-ghost-echo","title":"EarthQuaker Devices Ghost Echo","description":"\u003cp\u003eEQD has joined forces with Brain Dead, the L.A.-based creative studio, for an ultra-cool collaboration featuring a special, limited colorway of the Ghost Echo Vintage Voiced Reverb available NOW!\u003cbr\u003e\u003cbr\u003eThe Brain Dead creative brain trust has worked with an array of artists, musicians, brands, and companies on one-off runs featuring their colorful combinations of low- and high-brow art drawn from the international street and subcultures they love and celebrate. Here at EQD, we are also inspired by much of the same cinema, music, comics, and all left-of-center forms of art and media as the Brain Dead folks. So, we are giddy with excitement and appreciation that the always innovative brand chose to use one of our stompboxes as a canvas for its latest creative endeavor.\u003c\/p\u003e \u003cp\u003eWe think Brain Dead's eye-mesmerizing graphics pair perfectly with the sound-expanding Ghost Echo, turning it into genuinely functional art. In addition to the unique colorway, Brain Dead has specially designed some colorful and special packaging for the pedal. So, whether you place it on your pedalboard or feature it on your mantle, the Brain Dead Ghost Echo is an excellent addition to your pedal and art collection.\u003c\/p\u003e \u003cp\u003eThe Brain Dead Ghost Echo is a limited production run, and their collaborations consistently sell out fast! So please reach out to your local EQD dealer or your favorite online gear retailer and get your pedal-lovin' hands on this unique L.A. to Akron collaboration.\u003c\/p\u003e","brand":"EarthQuaker","offers":[{"title":"Default Title","offer_id":48304196452544,"sku":"GHOSTECHOV3","price":199.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4002\/9888\/files\/s9wnplv0z2dugzvuumg5__08183.1682744650.1280.1280.jpg?v=1779236503"},{"product_id":"earthquaker-devices-space-spiral","title":"EarthQuaker Devices Space Spiral","description":"\u003cb\u003e    \u003cstrong\u003eSpace Spiral™\u003c\/strong\u003e  \u003cstrong\u003eModulated Delay Device\u003c\/strong\u003e \u003c\/b\u003e\u003cp\u003eThe Space Spiral is a dark and dreamy modulated delay designed to take you across the highways of fantasy. While the delay may be designed around a “dawn of digital” echo processor, the sound is out of this world, man. If you are a fan of the dreary echoes produced by old oil can delays or the ethereal sound of a well-loved tape delay, the Space Spiral is totally going to tickle your tone bone.\u003cbr\u003e \u003cbr\u003eThe Space Spiral’s delay time ranges from a tight 30ms to a fast and loose 600ms. Can you imagine having 600ms of delay time at your fingertips? Out of this world! With all of this adjustable delay time you create anything from a classic slapback to a rhythmic wash of cosmic proportions. You want to take it even further? Maybe to an astral plane? Crank up the repeats and let the infinite oscillation of the Space Spiral take you to the other side.\u003cbr\u003e \u003cbr\u003eSpace Spiral™… It’ll get you through the night.\u003c\/p\u003e       \u003cstrong\u003eControls\u003c\/strong\u003e \u003cp\u003e\u003cstrong\u003eTime:\u003c\/strong\u003e Delay time goes from 30ms to 600ms; Clockwise for long and counterclockwise for short.\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePro Tip: If you have the repeats all the way up into self-oscillation territory, tum the delay time to alter the frequency.\u003c\/em\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRepeats:\u003c\/strong\u003e Controls the regeneration of the delay signal. Repeats increase clockwise and gradually begin to build into self-oscillation around 3 o'clock. This oscillation will infinitely continue until the Repeats control is brought back down below the 3 o'clock threshold. These oscillations will last even when the pedal is in bypass mode.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMix:\u003c\/strong\u003e Blends the delay signal in with the dry; Clockwise for more and counterclockwise for less.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDepth:\u003c\/strong\u003e Controls the desired amount of modulation; Clockwise for more and counterclockwise for less.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShape:\u003c\/strong\u003e Morphs the wave shape from a soothing triangle shape to a choppy square shape as you turn clockwise.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRate:\u003c\/strong\u003e Controls the speed of the modulation; Clockwise for fast and counterclockwise for short..\u003c\/p\u003e\u003cp\u003e\u003cem\u003ePro Tip: Match the Rate to the delay time (or a subdivision) for some cool rhy1hmic effects. This is especially awesome in square wave mode with the depth set high. \u003c\/em\u003e\u003c\/p\u003e   ","brand":"EarthQuaker","offers":[{"title":"Default Title","offer_id":48304196485312,"sku":"SPACESPIRALV2","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4002\/9888\/files\/Space-Spiral__70971.1682958413.1280.1280.jpg?v=1779236504"},{"product_id":"earthquaker-devices-speaker-cranker-overdrive","title":"EarthQuaker Devices Speaker Cranker Overdrive","description":"\u003cstrong\u003eSpeaker Cranker™\u003cbr\u003e\u003c\/strong\u003eOverdrive \u003cp\u003eThe Speaker Cranker™ is a discrete, all-analog distortion enhancement device (i.e., not a booster), designed to give your signal some extra grit and a slight boost without drastically altering your tone. Think of it as sticking an extra preamp tube in your amplifier for more overdrive.\u003c\/p\u003e\u003cp\u003eSingle notes will blossom and bloom with rich harmonics and responsive, tube-like sag. Power chords will sound thicker and crunchier, a little more ragged around the edges. Complex chords will remain distinct and complex, as the Speaker Cranker is designed to preserve your tone’s integrity without muddying up the low-end, or “rounding out” the mids, or adding any top-end “shimmer,” or “sparkle,” or any of that other garbage. It’s your tone. Cranked. Ya got that?\u003c\/p\u003e\u003cp\u003eRepeat after me: “The Speaker Cranker is an overdrive, not a boost.”\u003c\/p\u003e","brand":"EarthQuaker","offers":[{"title":"Default Title","offer_id":48304196518080,"sku":"SPECIALCRANKERV1","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4002\/9888\/files\/wwpixbe2wfs2e5y6jqr8__67028.1682744657.1280.1280.jpg?v=1779236505"},{"product_id":"earthquaker-devices-swiss-things","title":"EarthQuaker Devices Swiss Things","description":"\u003cstrong\u003eSwiss Things™\u003cbr\u003e\u003c\/strong\u003ePedalboard Reconciler \u003cp\u003eSwiss Things™ combines two true-bypass Flexi-Switch™ enabled effects loops, a Flexi-Switch™ AB-Y box with transformer isolation between outputs, a buffered tuner output, 20dB of clean boost with adjustable gain, an expression pedal output for volume control and a quiet, high headroom output buffer into a compact pedalboard-friendly signal routing junction box that lives at the top-right corner of your pedalboard and really ties your rig together without any signal loss.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eThis is what you can do with it:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cp\u003eUse as many pedals as you’d like without tone-suck\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eQuickly and easily bypass or engage all of your effects with one click\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eUse Flexi-Switch™ Technology with every pedal in your setup\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eEliminate volume pedal tone-suck by using any expression pedal to control volume\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cp\u003eUse multiple amps without phase issues, ground loops, or extra noise\u003c\/p\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTidy up your rig, shorten cable runs, and reduce tone loss by keeping all inputs and outputs in one location \u003c\/p\u003e     \u003cstrong\u003eHere’s what the footswitches do:\u003c\/strong\u003e \u003cp\u003e\u003cstrong\u003e1. Loop 1:\u003c\/strong\u003e Press this to engage \u003cstrong\u003eLoop 1\u003c\/strong\u003e. It features Flexi-Switch™ Technology and is unbuffered for use with all distortion, overdrive, and fuzz pedals, or anything else that doesn’t like being buffered. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Loop 2:\u003c\/strong\u003e Press this to engage \u003cstrong\u003eLoop 2\u003c\/strong\u003e. It also features Flexi-Switch™ Technology and is buffered for use with time-based effects (delay, reverb, modulation, etc.).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote:\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003e when nothing is plugged into Loop 2, it functions as a mute.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Boost:\u003c\/strong\u003e press this to activate the boost. It is Flexi-Switch™ Technology enabled and provides up to 20dB of clean boost post-effects loops and is intended for use as an output booster.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. A\/B:\u003c\/strong\u003e selects between \u003cstrong\u003eOutput A\u003c\/strong\u003e and \u003cstrong\u003eOutput B\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote:\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003e Output B is transformer-isolated and includes a Phase switch for use with pedals and\/or amplifiers which invert phase.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5. Both:\u003c\/strong\u003e activates \u003cstrong\u003eOutput A\u003c\/strong\u003e and \u003cstrong\u003eOutput B\u003c\/strong\u003e at the same time and features Flexi-Switch™ Technology\u003c\/p\u003e       \u003cstrong\u003eHere’s what the input, output, send, return, and expression jacks are for:\u003c\/strong\u003e \u003cp\u003e\u003cstrong\u003e6. Input:\u003c\/strong\u003e plug your instrument in here.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote:\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003e If you have any “always-on” pedals (compressors, preamps, EQs, etc.) place them before Swiss Things’ input. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e7. Loop 1 Send:\u003c\/strong\u003e Plug this into the input of the first pedal in the octave\/overdrive\/distortion\/fuzz section of your board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8. Loop 1 Return:\u003c\/strong\u003e Plug the output of the last pedal of the octave\/overdrive\/distortion\/fuzz section into this jack. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e9. Loop 2 Send:\u003c\/strong\u003e Plug this into the input of the first pedal in the modulation section of your board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e10. Loop 2 Return:\u003c\/strong\u003e Plug the output of the last pedal of your modulation section into this jack. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e11. Tuner Output:\u003c\/strong\u003e Connect this to the input of your tuner. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote:\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003e Tuner must be always turned on. If you bypass your tuner, you may experience ground loops or hum.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e12. Volume EXP:\u003c\/strong\u003e Connect any expression pedal to this output to control volume.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote:\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003e Most volume pedals create “tone-suck” by loading the signal down and have limited travel. This solves that problem with a buffered output and allows you to use any expression pedal with the same results. The expression jack is placed after the “dirt” effects loop (Loop 1) which allows you to change volume levels without affecting gain.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e13. Output A:\u003c\/strong\u003e connect this to the input of your amplifier.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e14. Output B:\u003c\/strong\u003e connect this to the input of a separate amplifier to use multiple amps and\/or to play in stereo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote:\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003e To use Swiss Things with stereo effects, they should be placed after Outputs A \u0026amp; B and both outputs must be selected using the Both switch. \u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote:\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003e Output B is transformer-isolated and includes a Phase switch for use with pedals and\/or amplifiers which invert phase.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cem\u003eNote:\u003c\/em\u003e\u003c\/strong\u003e\u003cem\u003e To use stereo effects after Swiss Things, do not have the Phase switch engaged otherwise the L \u0026amp; R inputs of your stereo effects will be out of phase.\u003c\/em\u003e\u003c\/p\u003e    \u003cbr\u003e\u003cbr\u003e  \u003cbr\u003e\u003cbr\u003e    Example Pedalboard Layout              \u003cbr\u003e\u003cbr\u003e    Block Diagram              \u003cbr\u003e \u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb\u003e\u003c\/b\u003e","brand":"EarthQuaker","offers":[{"title":"Default Title","offer_id":48304196550848,"sku":"SWISSTHINGS","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4002\/9888\/files\/ys6hfsb7ohj82tfsdfx3__13266.1682744657.1280.1280.png?v=1779236505"},{"product_id":"earthquaker-devices-westwood-translucent-drive-manipulator","title":"EarthQuaker Devices Westwood Translucent Drive Manipulator","description":"\u003cstrong\u003eWestwood Translucent Drive Manipulator\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003eHey there, Desperado, welcome to Westwood! We hope you’ll enjoy your stay. Westwood is a touch sensitive translucent overdrive manipulator as clean and pure as the breeze which blows through a grove of Douglas Fir trees, and as hot as a damn fine cup of coffee.\u003cbr\u003e \u003cbr\u003eThis mild-mannered light- to medium-gain overdrive will still knock the socks right off your trusty low-wattage combo amp, pushing it into anything from cutting, edge-of-breakup rhythm tones, all the way to articulate, singing lead tones stacked high with pleasing even-order harmonics and sweet, sweet sustain. And if you pair it up with your favorite head and cab, you should probably call the neighbors first, because the Westwood’s Level control has enough output on tap to alert the proper authorities. Even the FBI.\u003cbr\u003e \u003cbr\u003eThe Westwood’s Drive control sets the level of gain for a near-clean boost at lower settings, to rich, bell-like jangle and chime, all the way to soaring lead tones that are cutting and distinct, but never harsh. The Westwood responds to changes in guitar volume at any setting, and varying the intensity of your pick attack reveals the subtle nuances of your technique and tone. Your choir director will love it.\u003cbr\u003e \u003cbr\u003eThe powerful active EQ section has controls for Treble and Bass with up to 20 dB of cut and\/or boost. Center-detent pots indicate the “flat” setting. When you feel a click, there is neither cut nor boost, and your tone remains unaltered, but with extra gain.\u003cbr\u003e \u003cbr\u003eTreble affects the area around 2kHz and is handy for taming icepick-y single coils, or giving humbuckers a lift to add an open and airy top end sparkle as free and clear and uncompressed as the air all the way up in the lovely mountains of Tibet.\u003cbr\u003e \u003cbr\u003eThe Westwood’s Bass control operates around 80Hz and can be used to tighten up the low end of an already dark sounding guitar, or if turned up, will soften your attack, and introduce tube-like sag for a “browned out” sound with plenty of woody, organic bottom end thump that’ll make chords thick and chunky, while single notes bloom like the flowers of the majestic Dogwood.\u003cbr\u003e \u003cbr\u003eOn the bass guitar, the Westwood provides warm low-mids and a smooth top end with enough vintage grit to make your next gig at the Roadhouse both wonderful and strange. Let’s rock.\u003cbr\u003e \u003cbr\u003eEach and every Westwood is a real Blue Rose case, hand built by a team of special agents in the Black Lodge of Akron, Ohio, USA, where the owls are not what they seem, there’s always music in the air, and the birds sing a pretty song.\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eControls\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eLevel: \u003c\/strong\u003eAdjusts Westwood’s output level. Clockwise is loud, counterclockwise is quiet.\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eDrive: \u003c\/strong\u003eAdjusts the amount of overdrive. Clockwise is dirty, counterclockwise is clean.\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eBass: \u003c\/strong\u003eSelects amount of low frequencies around 80Hz. Clockwise to boost, counterclockwise to cut.\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eTreble: \u003c\/strong\u003eSelects amount of high frequencies around 2kHz. Clockwise to boost, counterclockwise to cut.\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePower \u003c\/strong\u003e\u003cbr\u003eWestwood can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. Do not run at higher voltages!\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eSwitching\u003c\/strong\u003e\u003cbr\u003eThis device is true bypass and uses electronic relay based switching. Audio will not pass without power.\u003cbr\u003e","brand":"EarthQuaker","offers":[{"title":"Default Title","offer_id":48304196583616,"sku":"WESTWOOD","price":179.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4002\/9888\/files\/izd2lh69wvhpdz6699yg__01690.1682744658.1280.1280.jpg?v=1779236506"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0754\/4002\/9888\/collections\/image_202-20-25_20at_202.04_E2_80_AFpm_1740081896__75628.original.jpg?v=1776810601","url":"https:\/\/oklahomamusicco.com\/collections\/earthquaker.oembed","provider":"Oklahoma Music Company","version":"1.0","type":"link"}